VirtualTablet: Bluetooth
User Guide
Monitor Selection

Selecting Specific Monitor in Multi-Monitor Environment

Windows Users

For Windows users with multiple monitors, by default, stylus pen input is only sent to the first monitor without any additional configuration. To direct input to your desired monitor, follow these configuration steps.

ℹ️
Note: While it’s possible to select a specific monitor for input, it’s not possible to span input across multiple monitors.

Accessing Tablet PC Settings Menu

Method 1: Using Control Panel

Find and access the settings menu through Control Panel.

  1. Open Control Panel
  2. Change View by to Large icons in the top right corner
  3. Find and open Tablet PC Settings

Tablet PC Settings location in Control Panel

⚠️
Once VirtualTablet: Bluetooth is properly connected to your Windows PC, Windows recognizes that a pen device is available, which automatically adds the Tablet PC Settings menu to Control Panel.

If you cannot find this menu in Control Panel after a successful connection, try the following:

  1. Restart your computer and check again.
  2. If you still can’t find it, try removing the pairing from both your mobile device and PC, then reconnect.
  3. You can also try Method 2 below to directly access Tablet PC Settings. However, if a pen device is not recognized correctly, you still won’t be able to change the target monitor (all buttons in Tablet PC Settings will be disabled without a pen device).
ℹ️

Tip: To verify if your pen device is properly recognized by Windows, go to Settings > System > About and look for the “Pen support” indicator.

Check Pen Support in System Info

Method 2: Creating Shortcut

Create a shortcut to directly access the settings menu without searching through Control Panel.

  1. Go to your Desktop.
  2. Right-click on an empty area of the desktop and select New > Shortcut from the menu.
  3. Paste the following into Item location: 
    %windir%\explorer.exe shell:::{80F3F1D5-FECA-45F3-BC32-752C152E456E}
  4. Name the shortcut Tablet PC Settings.
  5. Open the created shortcut.

Selecting Monitor

Before selecting a monitor, first run the VirtualTablet: Bluetooth app, complete the connection, and verify that stylus pen input is being transmitted properly.

Then follow these steps:

  1. Open the Tablet PC Settings window using either Method 1 or Method 2 above.
  2. Click the Setup button in the Configuration section.
  3. The following message will appear on one of your monitors:

Monitor selection message

To select the monitor displaying this message:

  • Simply touch the screen with the pen in the VirtualTablet: Bluetooth app.

To select a different monitor:

  • Press Enter on your keyboard to cycle through monitors until the message appears on your desired monitor.
  • Then touch the screen with the pen in the VirtualTablet: Bluetooth app.

Once configured, you can verify that pen input is being directed to your selected monitor.

Mac Users

Unlike Windows users, Mac users can select a target monitor directly in the VirtualTablet: Bluetooth Agent app installed on macOS.

If you have not installed the agent app yet, you can download it from the Download page.

To select a monitor:

  1. Open the VirtualTablet: Bluetooth Agent app on your Mac.
  2. Select your desired monitor from the menu displayed within the agent app.
Getting StartedSupported Devices